View Single Post
Old 07-05-2008, 02:55 PM   #2 (permalink)
cyfer33
Lead Treonaut
 
cyfer33's Avatar
 
Join Date: Dec 2007
Location: Eastside
My Treo: Treo 650
My Carrier: Other
My OS: Other
Posts: 261
Thanks: 38
Thanked 263 Times in 160 Posts
cyfer33 is a jewel in the roughcyfer33 is a jewel in the roughcyfer33 is a jewel in the rough
Send a message via MSN to cyfer33
Paper How to change your Network Operator's Name

One of the most asked and sought after tweak is how to change your Network Operator's name to something much more cooler! As usual, a Registry Editor must be installed on your Treo before proceeding.



1) Go to HKEY_LOCAL_MACHINE/Software/Microsoft/RIL/OperatorNames using any Registry Editor.
2) Create a new String value using MNC/MCC of your operator as value name.
3) Then under value data, type any desired name.
4) Turn off your Phone or remove the battery (pls allow a min of 20 secs before turning it on again)
5) Turn on your phone again to see the change.

For a complete list of operators, you can check out:

Mobile Network Code - Wikipedia, the free encyclopedia

Here's an example. Lets say the Carrier is AT&T which MCC is '310' and MNC is '090'. Then the string value should be set to '310090'.
__________________
Treonauts Treo 750 Registry Tricks and Tips

Proud Owner of a Palm Treo 650 Black Tie and a Treo 750v! (:
----------------------------------------------------------
Treo 750v currently running WM6.1 OS 5.2_19199WWE on Radio 1.56.70.11

Last edited by cyfer33; 07-10-2008 at 03:31 AM.
cyfer33 is offline   Reply With Quote
The Following 5 Users Say Thank You to cyfer33 For This Useful Post:
draver17 (07-13-2008), gdseric (07-08-2008), jfa02 (07-09-2008), phantomy2g (07-05-2008), winmob (07-06-2008)
 
Page generated in 0.30854 seconds with 12 queries