No Alarm or ringer sounds

[rupidoo]

Set my alarm last night on the treo pro for 6.00 am this morning and awoke at 7:10 when the baby started crying, a nice lie in but annoyingly late for a busy day at work, arrive at work (granted having not connected my bt headset in the car) and found I've missed three calls. Strange, the ringer is switched on and alarm notification tones are all activated.

Tested the alarm feature again at work and still no audible tone or vibration and no ring tone on incoming calls working either, though vibrate works on incoming calls if the ringer is turned off. Done a soft reset, no better, will do a hard reset tonight (have to perform an active sync first) and see if that fixes the problem.

I've also googled the issue and found folks with similar issues on the Treo 750 and an available fix. (Due to the audio drivers getting confused) Has anyone experienced this with their Treo Pro and any ideas about a fix??

Many thanks.

[Esquire010]

What a coincidence. Over the weekend I was away and relied on my TreoPro to act as an alarm clock for the first time. On Saturday, the Pro woke me up but it was more the vibrations against the nightstand that woke me up than the sound of the alarm. On Sunday, I turned off the vibrate mode and the phone rang once every 30 seconds for two minutes and that was it. I was disappointed that the alarm wasn't more alarming. I read in another forum that you can put a longer alarm sound in your documents folder to offset the short alarm rings.

With respect to the missing calls, I too experienced that the first two weeks of owning the Pro. I now have a vibrating BT headset (the Jabra 5020, which for the money is quite good) which I carry in my hand or pocket that will vibrate and alert me to a call in lieu of missing a call because I relied on sound notifications. I realize this may not be an attractive workaround but the Pro is not a bug free device and I feel I have to do the best I can since I invested time and money in the device. I can honestly say that I have tweaked the device, added some very nice apps (memmaid, kinoma play, throttlelock, ION Digital Clock, my mobiler [which allows you to control your Pro device from your desktop while its charging/syncing on the craddle] and realvga) that have enhanced the UI of the device. With the exception of memmaid and kinoplay, the apps I mentioned are freeware, although memmaid offers a 15 day trial period which made me purchase the license after only 7 days of use. Memmaid is a great program that keeps your device humming at optimal speeds because it cleans the device of unnecessary files, duplicate notices and "dangling" ram for use. Pre-memmaid, the Pro would slow down after a few days use. Now, with memmaid, I feel the device is snappy everyday and the memory and RAM is at optimal clock speeds. Kinoma play offers kinoma free play for free but I opted to purchase the license. I watched re-runs of the old Incredible Hulk show on my Pro over a long road trip using kinomaplay. I was going to get SPB mobile shell but I hear it doesn't work well with realvga. Realvga definitely enhances your 320 x 320 real estate so that you scroll less. With little tweaks here and there, you can change the today screen to look more like a touch flo device but it will take time and patience to work out the settings.

Overall, I have had the Pro since October 24. My phone has not cracked and I can say I am very pleased with it. The Treo Pro is not the best phone out there but it does the job for me and in the end, that is all you should care about, whether the phone works for YOU.

[rupidoo]

Did a full hard reset after an active sync and sprite backup, after h reset, restored all contacts, notes, calendar etc with A/S, ringer, alarm etc all working fine. Then did full sprite backup restore (personal folders, system settings, connection manager, program files etc) and the phone ringer etc ceased to work again.

Did another full hard reset, active sync and sprite backup restore but this time only restored personal data (pics etc) and .cab files I've downloaded (Opera and Kevtris) then manually input all my old settings (connection manager today screen personalisation etc), installed program files (opera & kevtris) from .cab files rather than via sprite restore and did not restore old system settings and phone now works fine again. I've done a full sprite backup in the fully working state incase I get the same problem in the future. Hope this helps anyone with a similar problem.

[jfa02]

something in the first backup restore that you did was corrupted somehow. Hopefully the issue will not return.

[selcall]

Hi!

I just received my Treo Pro yesterday and I have what maybe a stupid question: how do I set an alarm on the Treo Pro?
By that I mean setting an alarm similar to the World Clock application on the Treo 650. Is there anything like that on the Pro or do I have to create an appointment in the calendar and set an alarm for that?

Cheers,
selcall

[jfa02]

I looked in the index of the user guide on line and found references to alarms on these entries
alarm clock 303
alarm sounds 304
alarms
adding 223, 228, 229
setting 290, 303
turning on and off 289

check on those pages and see if your find anything to help you and get back with us with your results. Enjoy

[selcall]

Thank you.

Selcall *who should get used to online user guides in a hurry*