Update for treo 680 is out! - Page 2 - Treo Forum

quimbly · 05-24-2007, 09:06 PM

I got the email from Palm also. I downloaded the update and was going through the process when it stopped and I got a screen that said, "Unsupported Device". I then read through the faqs. It turns out that the upgrade is for branded phones only. So because I bought a GSM unlocked at twice the price, I won't be able to upgrade my treo 680?

LotusLord · 05-24-2007, 09:20 PM

My 750 changed to ATT a few weeks ago. It just has to propagate through the network. My guess is by the end of the month no one will have Cingular anymore . My most recent bill is mostly at&t with a little cingular is now... in it.

Targon · 05-24-2007, 09:20 PM

Quote:

Originally Posted by quimbly

I got the email from Palm also. I downloaded the update and was going through the process when it stopped and I got a screen that said, "Unsupported Device". I then read through the faqs. It turns out that the upgrade is for branded phones only. So because I bought a GSM unlocked at twice the price, I won't be able to upgrade my treo 680?

There should be a different download for unlocked phones. If it's not available yet, I suspect it should be in the next few days.

comiken205 · 05-24-2007, 09:24 PM

Thanks to all that have posted so far. Many people will have many questions regarding this update. I, as well as everyone needing your help, ask that you continue to update this thread as to the workings of your phone after this update. Any piece of information is most helpful. I have seen a Palm Tech on here once or twice. So, if an issue does come about, they may see it.

Of course, don't forget to e-mail palm with any issues.

bgattis · 05-24-2007, 09:25 PM

I installed the update. The install went fine and then when it was finished the phone was stuck in a loop. Luckily I had made a backup right before I installed the update. Did a hard reset...did a restore and everything is now updated to att. Everything I have tested so far has been working just fine...maybe a little faster now too.

comiken205 · 05-24-2007, 09:36 PM

Okay,

So I understand, and others as well. You installed the update, your phone was in a loop, and after a hard reset, you still had the update on your phone?

bgattis · 05-24-2007, 09:44 PM

Quote:

Originally Posted by comiken205

Okay,

So I understand, and others as well. You installed the update, your phone was in a loop, and after a hard reset, you still had the update on your phone?

Yes. After the hard reset and the restore everything is still up to date.

rick680 · 05-24-2007, 11:54 PM

The first time I tried the update, it didn't really do anything for some reason. I know everything was plugged in right. But . . . anyway, when it said it was finished, my Treo immediately went into a reset loop. I had to hard reset to get out of it. Then I ran the updater again and this time everything worked fine. Then I just restored the NVBackup I created right before running the update. Aside from having to re-enter some reg information, everything seems to be working fine, right now.

lmw · 05-25-2007, 08:56 AM

I did my update via SD card and it went fine. I had to re-enter my serial number for Treo Launcher, but other than that everything so far is fine.

LotusLord · 05-25-2007, 09:00 AM

So it's like installing Service Pack 2 on a machine that has all kinds of spyware, you have to reformat and reinstall?

05-24-2007, 09:06 PM	#11 (permalink)
quimbly A Few Questions.... Join Date: Jan 2007 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	GSM unlocked I got the email from Palm also. I downloaded the update and was going through the process when it stopped and I got a screen that said, "Unsupported Device". I then read through the faqs. It turns out that the upgrade is for branded phones only. So because I bought a GSM unlocked at twice the price, I won't be able to upgrade my treo 680?

05-24-2007, 09:20 PM	#12 (permalink)
LotusLord Moderator Join Date: Apr 2007 Location: Milwaukee, WI My Treo: Treo 750 My Carrier: Cingular/AT&T My OS: Vista Posts: 2,631 Thanks: 117 Thanked 258 Times in 229 Posts	My 750 changed to ATT a few weeks ago. It just has to propagate through the network. My guess is by the end of the month no one will have Cingular anymore . My most recent bill is mostly at&t with a little cingular is now... in it. Last edited by LotusLord; 05-24-2007 at 09:24 PM. Reason: gramar

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Treo 680 update - hangs	hhol	Treo 680	0	03-07-2008 08:39 AM
disappointed with the 680 update!	carpentierk	Treo 680	2	07-26-2007 08:19 AM
Battery drainage after loading the update for the 680.	Massunit	Treo 680	3	06-11-2007 04:36 PM
Treo 680 Software/Firmware Update v1.09	skoenig	Treo News	1	05-29-2007 02:11 PM
Treo 680 Synch problems after Microsoft Windows update dowload .HELP!!!!	ronquillaw	Synchronization	0	03-15-2007 10:26 PM

05-24-2007, 09:24 PM	#14 (permalink)
comiken205 Moderator Join Date: Oct 2006 Location: Maricopa, AZ My Treo: Treo 755p My Carrier: Sprint My OS: XP Posts: 1,926 Thanks: 114 Thanked 154 Times in 143 Posts	Thanks to all that have posted so far. Many people will have many questions regarding this update. I, as well as everyone needing your help, ask that you continue to update this thread as to the workings of your phone after this update. Any piece of information is most helpful. I have seen a Palm Tech on here once or twice. So, if an issue does come about, they may see it. Of course, don't forget to e-mail palm with any issues.

05-24-2007, 09:25 PM	#15 (permalink)
bgattis Regular Contributer Join Date: May 2007 Location: Fayetteville My Treo: Treo 680 My Carrier: Cingular/AT&T My OS: Vista Posts: 107 Thanks: 25 Thanked 22 Times in 10 Posts	I installed the update. The install went fine and then when it was finished the phone was stuck in a loop. Luckily I had made a backup right before I installed the update. Did a hard reset...did a restore and everything is now updated to att. Everything I have tested so far has been working just fine...maybe a little faster now too.

05-24-2007, 09:36 PM	#16 (permalink)
comiken205 Moderator Join Date: Oct 2006 Location: Maricopa, AZ My Treo: Treo 755p My Carrier: Sprint My OS: XP Posts: 1,926 Thanks: 114 Thanked 154 Times in 143 Posts	Okay, So I understand, and others as well. You installed the update, your phone was in a loop, and after a hard reset, you still had the update on your phone?

05-24-2007, 11:54 PM	#18 (permalink)
rick680 Junior Member Join Date: Dec 2006 Posts: 38 Thanks: 1 Thanked 2 Times in 2 Posts	The first time I tried the update, it didn't really do anything for some reason. I know everything was plugged in right. But . . . anyway, when it said it was finished, my Treo immediately went into a reset loop. I had to hard reset to get out of it. Then I ran the updater again and this time everything worked fine. Then I just restored the NVBackup I created right before running the update. Aside from having to re-enter some reg information, everything seems to be working fine, right now.

05-25-2007, 08:56 AM	#19 (permalink)
lmw Member Join Date: Apr 2007 Posts: 48 Thanks: 4 Thanked 1 Time in 1 Post	I did my update via SD card and it went fine. I had to re-enter my serial number for Treo Launcher, but other than that everything so far is fine.

05-25-2007, 09:00 AM	#20 (permalink)
LotusLord Moderator Join Date: Apr 2007 Location: Milwaukee, WI My Treo: Treo 750 My Carrier: Cingular/AT&T My OS: Vista Posts: 2,631 Thanks: 117 Thanked 258 Times in 229 Posts	So it's like installing Service Pack 2 on a machine that has all kinds of spyware, you have to reformat and reinstall?

	Bestselling Cradles & Cables	[ Browse all cradles & cables ]